View D1106_857160.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

systembaugruppe D1106 systembaugruppe D1106 systembaugruppe D1106 systembaugruppe D1106 system board D1106 system board D1106 system board D1106 system board D1106 technisches handbuch technisches handbuch technisches handbuch technisches handbuch technical manual technical manual technical manual technical manual
sie haben ... ... technische fragen oder probleme? wenden sie sich bitte an: ? einen unserer servicepartne r ? ihren zust?ndigen vertriebspartne r ? ihre verkaufsstelle die adressen ihrer servicepartner finden sie im garantieheft oder im service-adressenheft. aktuelle informationen zu unseren produkten, tipps, updates usw. finden sie im internet: http://www.fujitsu-siemens.com is there ... ... any technical problem or other question you need clarified? please contact: ? one of our service partners ? your sales partne r ? your sales outlet the addresses of your service partners are contained in the guarantee booklet or in the service address booklet. the latest information on our products, tips, updates, etc., can be found on the internet under: http://www.fujitsu-siemens.com

dieses handbuch wurde auf recycling-papier gedruckt. this manual has been printed on recycled paper. ce manuel est imprim sur du papier recycl. este manual ha sido impreso sobre papel reciclado. questo manuale stato stampato su carta da riciclaggio. denna handbok ?r tryckt p? recyclingpapper. dit handboek werd op recycling-papier gedrukt. herausgegeben von/published by fujitsu siemens computers gmbh bestell-nr./order no.: a26361-D1106-z120-1-7419 a26361-D1106-z120-1-7419 a26361-D1106-z120-1-7419 a26361-D1106-z120-1-7419 printed in the federal republic of germany ag 0100 01/00 a26361-D1106-z120-1-7419 systembaugruppe D1106 system board D1106 technisches handbuch technical manual
systembaugruppe D1106 system board D1106 technisches handbuch technical manual deutsch en g lish ausgabe januar 2000 january 2000 edition
intel, pentium und celeron sind eingetragene warenzeichen und mmx und overdrive sind warenzeichen der intel corporation, usa. microsoft, ms, ms-dos und windows sind eingetragene warenzeichen der microsoft corporation. ps/2 und os/2 warp sind eingetragene warenzeichen von international business machines, inc. magic packet ist ein eingetragenes warenzeichen von advanced micro devices, inc. alle weiteren genannten warenzeichen sind warenzeichen oder eingetragene warenzeichen der jeweiligen inhaber und werden als geschtzt anerkannt. alle rechte vorbehalten, insbesondere (auch auszugsweise) die der bersetzung, des nachdrucks, der wiedergabe durch kopieren oder ?hnliche verfahren. zuwiderhandlungen verpflichten zu schadenersatz. alle rechte vorbehalten, insbesondere fr den fall der patenterteilung oder gm-eintragung. lieferm?glichkeiten und technische ?nderungen vorbehalten. copyright fujitsu siemens computers gmbh 2000 intel, pentium and celeron are registered trademarks and mmx and overdrive are trademarks of intel corporation, usa. microsoft, ms, ms-dos and windows are registered trademarks of microsoft corporation. ps/2 and os/2 warp are registered trademarks of international business machines, inc. magic packet is a registered trademark of advanced micro devices, inc. all other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. all rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. offenders will be liable for damages. all rights, including rights created by patent grant or registration of a utility model or design, are reserved. delivery subject to availability. right of technical modification reserved.
a26361-D1106-z120-8-7419 contents introduction ............................................................................................................................... .........1 notational conventions ..............................................................................................................1 important notes ............................................................................................................................... ..1 information on boards ................................................................................................................2 features ............................................................................................................................... .............3 interfaces and connectors .........................................................................................................4 temperature monitoring / system monitoring .............................................................................6 lan port ............................................................................................................................... .....7 resource table ..........................................................................................................................8 pci bus interrupts ......................................................................................................................8 settings with switches .......................................................................................................................9 recovering system bios - switch 2 ........................................................................................ 10 write protection for floppy disks - switch 3 ............................................................................... 10 clock frequency - switches 5 to 8 ............................................................................................ 10 add-on modules .............................................................................................................................. 1 2 installing / removing processor ................................................................................................ 13 upgrading main memory .......................................................................................................... 14 installing network board with wol ........................................................................................... 15 replacing the lithium battery .................................................................................................... 16 glossary ............................................................................................................................... ........... 17

a26361-D1106-z120-8-7419 english - 1 introduction i this system board is available in different configuration levels. depending on the hardware configuration of your device, it may be that you cannot find several options in your version of the system board, even though they are described. you may find further information in the description "bios setup". further information to drivers is provided in the readme files on hard disk or on the supplied drivers diskettes or on the "drivers & utilities" or "serverstart" cd. notational conventions the meanings of the symbols and fonts used in this manual are as follows: ! pay particular attention to texts marked with this symbol. failure to observe this warning endangers your life, destroys the system, or may lead to loss of data. i supplementary information, remarks and tips follow this symbol. texts which follow this symbol describe activities that must be performed in the order shown. ? this symbol means that you must enter a blank space at this point. this symbol means that you must press the enter key. texts in this typeface are screen outputs. texts in this bold typeface are the entries you make via the keyboard. texts in italics indicate commands or menu items. "quotation marks" indicate names of chapters and terms that are being emphasized. important notes store this manual close to the device. if you pass on the device to third parties, you should also pass on this manual. ! be sure to read this page carefully and note the information before you open the device. you cannot access the components of the system board without first opening the device. how to dismantle and reassemble the device is described in the operating manual accompanying the device. please note the information provided in the chapter "safety" in the operating manual of the device. incorrect replacement of the lithium battery may lead to a risk of explosion. it is therefore essential to observe the instructions in the chapter ? add-on modules ?-? replacing the lithium battery ?.
important notes 2 - english a26361-D1106-z120-8-7419 the shipped version of this board complies with the requirements of the eec directive 89/336/eec "electromagnetic compatibility". compliance was tested in a typical pc configuration. when installing the board, refer to the specific installation information in the operating manual or technical manual of the receiving device. connecting cables for peripherals must be adequately insulated to avoid interference. ! components can become very hot during operation. make sure you do not touch components when making extensions to the system board. there is a danger of burns! i the warranty is invalidated if the device is damaged during the installation or replacement of system expansions. information on which system expansions you can use is available from your sales outlet or the customer service center. information on boards to prevent damage to the system board or the components and conductors on it, please take great care when you insert or remove boards. take care above all to ensure that extension boards are slotted in straight without damaging components or conductors on the system board, or any other components, for example emi spring contacts. be especially careful with the locking mechanisms (catches, centering pins etc.) when you replace the system board or components on it, for example memory modules or processors. never use sharp objects (screwdrivers) for leverage. boards with electrostatic sensitive devices (esd) are identifiable by the label shown. when you handle boards fitted with esds, you must observe the following points under all circumstances: ? you must always discharge yourself (e. g. by touching a grounded object) before working. ? the equipment and tools you use must be free of static charges. ? pull out the power plug before inserting or pulling out boards containing esds. ? always hold boards with esds by their edges. ? never touch pins or conductors on boards fitted with esds.
features a26361-D1106-z120-8-7419 english - 3 features the components and connectors marked are not necessarily present on the system board. ? system board in micro atx format ? intel pentium ii processor with 100 mhz or 66 mhz front side bus for slot 1 processor socket or ? intel pentium iii processor with 100 mhz front side bus for slot 1 processor socket or ? intel celeron processor with 66 mhz front side bus for slot 1 processor socket intel pentium ii / iii and celeron processors support mmx technology. size and frequency of first- level cache and second-level cache are depending on the processor used. ? intel chipset 440bx / piix4e ? intel 82559 lan controller (10/100 mbit/s) with rj45 interface wol with magic packet is supported, as is booting from lan with bootix lan bootp or intel lsa. ? fujitsu siemens system monitoring and temperature monitoring ? 3 dimm slots for 16 to 768 mbyte main memory (sdram memory modules) ? flash bios ? energy saving functions: acpi and apm. for the save-to-ram and the save-to-disk functionality you require an operating system that supports acpi. ? safety functions: chipcard reader interface, detection of unauthorized opening of the housing, simple error detection and correction in the main memory with an ecc, system, setup and keyboard password, parallel and serial ports can be deactivated, write protection for floppy disk drive, virus warning function for the boot hard disk, virus protection function for the flash bios and the eeproms on the memory modules. ? 1 agp slot, 2 pci slots, 1 isa/pci slot (shared) agp and pci slots support 3.3 v main and auxiliary voltages. ? ide hard disk controller connected to pci bus for up to four ide drives (e.g. ide hard disk drives, atapi cd-rom drives) the ide hard disk controller are ultra dma33 mode capable and support pio modes 0-4. ? floppy disk drive controller (possible formats: 720 kbyte, 1.44 mbyte, 2.88 mbyte) ? the system board supports booting from a 120 mbyte ide floppy disk drive. ? 1 external parallel interface (ecp- and epp-compatible) ? 1 external serial port (16c550 compatible with fifo) ? 1 internal chipcard reader interface. as an alternative this interface can also be used as a second serial port (16c550 compatible with fifo). ? 1 internal wol interface ? 2 external ps/2 interfaces for keyboard and mouse ? 2 external usb ports (usb = universal serial bus) ? real-time clock/calendar with integrated battery backup
features 4 - english a26361-D1106-z120-8-7419 interfaces and connectors 2 1 isa pci 2 pci 1 pci 3 agp slot 1 3 4 13 6 2 5 7 1 = serial port 1 2 = ps/2 mouse port 3 = ps/2 keyboard port 4 = parallel port 5 = usb port 2 6 = usb port 1 7 = lan port the components and connectors marked are not necessarily present on the system board.
features a26361-D1106-z120-8-7419 english - 5 2 1 isa pci 2 pci 1 pci 3 agp slot 1 3 12 3 4 56 7 8 9 10 11 12 13 1 = serial chipcard reader interface or seria l port 2 2 = power suppl y 3 = floppy disk drive 4 = ide drives 3 and 4 (secondary) 5 = on/off switch 6 = wake on lan 7 = ide drives 1 and 2 (primary) 8 = connector for front panel 9 = usb chipcard reade r 10 = fan (e. g. for the processor) 11 = fan (e. g. for the processor) 12 = power supply monitoring 13 = cover monitoring the components and connectors marked are not necessarily present on the system board.
features 6 - english a26361-D1106-z120-8-7419 temperature monitoring / system monitoring one goal of temperature and system monitoring is to reliably protect the computer hardware against damage caused by overheating. in addition, any unnecessary noise is also to be prevented with a reduced fan speed, and information is to be provided on the system state. the cover monitoring protects the system from unauthorized opening. the temperature and system monitoring are controlled by an onboard controller developed by fujitsu siemens. the following functions are supported: temperature monitoring: measurement of the processor temperature, measurement of the system temperature with an onboard temperature sensor, measurement of the device temperature with an optional temperature sensor (aux). temperature control: the temperature is controlled with the fan speed and/or by reducing the clock frequency of the processor. the clock frequency of the processor is dependent on the setting in the bios setup . temperature-dependent processor speed control enables a reduced fan speed, decreasing noise. fan monitoring: fans that are no longer available, blocked or sticky fans are detected. blocked or sticky fans are operated with 12 v pulse voltage. fans removed while the system is switched off are signaled by the display news led when the system is switched on again and processed by the bios or the application. fan control: the fans are regulated according to temperature (exception: auxiliary fan (aux)). sensor monitoring: a fault or removal of a temperature sensor is detected. in this case all fans affected by this sensor run at maximum speed to achieve the greatest possible protection of the hardware. temperature sensors removed while the system is switched off are signaled by the display news led and processed by the bios or the application. cover monitoring: unauthorized opening of the cover is detected, even when the system is switched off. however, this will not be indicated until the system is operating again. voltage monitoring: the voltages 12 v , 5 v and the cmos battery are monitored.
features a26361-D1106-z120-8-7419 english - 7 with hardware monitoring - regardless of the operating system and processor - the advantages compared to conventional software monitoring are clear: ? suitable for all operating systems and processor types ? no additional load on processor (performance) ? optimum reliability, even if process faults or faults are present in the operating system ? optimum noise reduction three different operating modes are available and can be configured in bios setup - system management . lan port this system board is equipped with the intel 82559 lan controller as an option. this lan controller supports the transfer speeds 10 mbit/s and 100 mbit/s. the lan controller is equipped with a 3 kbyte transmission and receiving buffer (fifo) and supports the wol function through magic packet . it is also possible to boot a device without its own boot hard disk via lan. here bootix lan bootp and intel lsa are supported. the lan rj45 connector is equipped with a yellow and a green led (light emitting diode). 12 1 = yellow indicator 2 = green indicator green a connection exists (e. g. to a hub). yellow link mode: the lan connection is active. wol mode: a magic packet tm is being received.
features 8 - english a26361-D1106-z120-8-7419 resource table assigned irq possible irq possible address (hex) possible dma keyboard irq1 serial interface com1 3 4 03f8, 02f8 03e8, 02e8 serial port com2 3 4 02e8, 02f8 03e8, 03f8 floppy disk drive controller irq6 2 parallel interface lpt1 5, 7 0278, 0378, 03bc 0, 1, 3 rtc irq8 usb controller pnp mouse controller irq12 numeric processor irq13 ide controller 1 irq14 01f0-01f7 ide controller 2 irq15 0170-0177 lan pnp "assigned irq" = interrupts assigned as shipped "possible irq" = these interrupts can be used for your particular application "possible address" = this address can be used for your particular application "possible dma" = these dmas can be used for your particular application pci bus interrupts the following table shows which pci bus interrupts on the system board are assigned. pci bus interrupt component on system board: a a pci bus slot 1 agp slot b pci bus slot 2 c pci bus slot 3 d usb controlle r d lan controlle r
settings with switches a26361-D1106-z120-8-7419 english - 9 settings with switches 2 1 isa pci 2 pci 1 pci 3 agp slot 1 3 open / off on 1 2345 6 7 8 switc h 1 = must be set to off switc h 2 = system bios recovery (rcv) switc h 3 = write protection for floppy disks switc h 4 = reserved switche s5-8= clock frequency
settings with switches 10 - english a26361-D1106-z120-8-7419 recovering system bios - switch 2 switch rcv enables recovery of the old system bios after an attempt to update has failed. to restore the old system bios you need a flash bios diskette (please call our customer service center). on the system bios executes from floppy drive a: and the inserted "flash-bios- diskette" restores the system bios on the system board. off normal operation (default setting). write protection for floppy disks - switch 3 switch 3 is used to define whether floppy disks can be written or deleted in the floppy disk drive. to write and delete floppy disks, the write-protection in bios setup must be disabled (in menu security , the field diskette write must be set to enabled ). on the floppy disk drive is write-protected. off read, write and delete floppy disks is possible (default setting). clock frequency - switches 5 to 8 ! the switches may only be set as specified in the tables below for the particular processo r used. there are also processors, which automatically always operate at the proper frequency , regardless of the switch position. as these new processors do not differ externally from the previous processors, w e recommend always setting the switches in accordance with the processor. this system board you may use with pentium ii processors with 66 mhz or 100 mh z front side bus or with pentium iii processors with 100 mhz front side bus or wit h celeron processors with 66 mhz front side bus. information on which processors can be used is available from your sales outlet or th e customer service center. pentium ii with 66 mhz front side bus: processor switch 5 switch 6 switch 7 switch 8 300 mhz off on off on 333 mhz on off off on
settings with switches a26361-D1106-z120-8-7419 english - 11 celeron with 66 mhz front side bus: processor switch 5 switch 6 switch 7 switch 8 233 mhz off off on on 266 mhz on on off on 300 mhz off on off on 333 mhz on off off on 366 mhz off off off on 400 mhz on on on off 433 mhz off on on off 466 mhz on off on off 500 mhz off off on off 533 mhz on on off off pentium ii with 100 mhz front side bus: processor switch 5 switch 6 switch 7 switch 8 350 mhz off off on on 400 mhz on on off on 450 mhz off on off on pentium iii with 100 mhz front side bus: processor switch 5 switch 6 switch 7 switch 8 450 mhz off on off on 500 mhz on off off on 550 mhz off off off on 600 mhz on on on off 650 mhz off on on off 700 mhz on off on off 750 mhz off off on off 800 mhz on on off off
add-on modules 12 - english a26361-D1106-z120-8-7419 add-on modules ! for all steps described in this chapter exit the suspend mode before switching of f the device and then pull the power plug out of the power outlet ! even when you have run down the device, parts of the device (e. g. memor y modules, agp and pci extension boards) are still energized . should this be the case, the voltage indicator led glows. 2 1 isa pci 2 pci 1 pci 3 agp slot 1 3 1 2 3 4 5 67 89 1 = slot for processor with heat sink 2 = location bank 1 for main memory 3 = location bank 2 for main memory 4 = location bank 3 for main memory 5 = voltage indicator led 6 = lithium battery 7 = agp slot 8 = pci slots 1, 2, 3 9 = isa slot i agp and pci slots support 3.3 v main and auxiliary voltages.
add-on modules a26361-D1106-z120-8-7419 english - 13 installing / removing processor installing the processor i if you wish to upgrade your system with a new processor, the processor bracket on th e system board may need to be replaced beforehand . should it be necessary to replace th e bracket, please contact our customer service center. depending on the design of the processor housing, the heat sink can be moved on th e processor and the processor in the bracket. this floating suspension in the installed state ensures reliable contact between the processor and the heat sink . detents in the bracke t prevent the processor from slipping out. if the heat sink on the processor can be moved, then it must also be possible to move th e mounted processor in the bracket. this ensures optimum cooling. if you replace the processor, grasp the processor housing by the processor and the hea t sink. 2 2 1 1 1 2 2 1 (a) (b) the illustration shows two bracket and processor models. remove the terminating board if necessary. slide the processor into the bracket (1). push the processor down in the bracket and press it into the slot until the clamps (2) to the left and right snap into place. set the clock frequency of the new processor using switches 5 to 8 of the switch block. if the processor has a temperature sensor or a fan, attach the associated cable to the connector for the temperature sensor or the fan on the system board. plug in the voltage converter for the second processor.
add-on modules 14 - english a26361-D1106-z120-8-7419 removing the processor if the processor has a temperature sensor or a fan, pull out the associated cable. press the clamps (2) on either side of the processor slightly inwards (a) or outwards (b) and pull the processor up and out. use a screwdriver if necessary. insert the terminating board into the slot if necessary. pull the voltage converter for the second processor. upgrading main memory these slots are suitable for 16, 32, 64, 128 and 256 mbyte sdram memory modules of the dimm format. memory modules with different memory capacities can be combined. dimm = dual inline memory module sdram = synchronous dynamic random access memory ! you may only use unbuffered 3.3 v memory modules. buffered memory modules are no t permitted. sdram memory modules must be designed for a clock frequency of 100 mhz or highe r (meets pc100 specification). installing memory modules 2 2 flip the holders on each side of the relevant location outwards. insert the memory module into the location. at the same time flip the lateral holders upwards until the memory module snaps in place.
add-on modules a26361-D1106-z120-8-7419 english - 15 removing a memory module 1 1 flip the holders to the right and left of the location outwards. pull the memory module out of its location. installing network board with wol install the network board as described in the operating manual for your unit. push the wol cable onto the wol plug connector of the system board. i to use the wol functionality of a network board the power supply must provide a 5 v auxiliary voltage of at least 1 a. if the system board was not alread y incorporated in a device when you bought it you must check whether your powe r supply can provide the auxiliary voltage. you may find further information in the supplied description of the network board .
add-on modules 16 - english a26361-D1106-z120-8-7419 replacing the lithium battery ! incorrect replacement of the lithium battery may lead to a risk of explosion. the lithium battery must be replaced with an identical battery or a battery typ e recommended by the manufacturer (cr2032) . do not throw lithium batteries into the trashcan. it must be disposed of in accordance with local regulations concerning special waste. make sure that you insert the battery the right way round. the plus pole must be on th e top! 1 2 3 + + + + lift the contact (1) a few millimeters and remove the battery from its socket (2). insert a new lithium battery of the same type in the socket (3).
glossary a26361-D1106-z120-8-7419 english - 17 glossary the technical terms and abbreviations given below represent only a selection of the full list of common technical terms and abbreviations. not all technical terms and abbreviations listed here are valid for the described system board. acpi............................ advanced configuration and power interface ac'97 .......................... audio codec '97 agp ............................ accelerated graphics port amr ............................ audio modem riser aol............................. alert on lan apm ............................ advanced power management ata ............................. advanced technology attachment bios ........................... basic input output system can............................. controller area network cpu............................. central processing unit c-rimm....................... continuity rambus inline memory module dimm........................... dual inline memory module ecc............................. error correcting code eeprom..................... electrical erasable programmable read only memory fdc............................. floppy disk controller fifo............................ first-in first-out fsb ............................. front side bus fwh............................ firmware hub gmch ......................... graphics and memory controller hub i 2 c ............................... inter integrated circuit iapc............................ instantly available power managed desktop pc design ich.............................. i/o controller hub ide .............................. intelligent drive electronics ipsec ......................... internet protocol security isa .............................. industrial standard architecture lan ............................. local area network lsa ............................. lan desk service agent mch............................ memory controller hub mmx............................ multimedia extension pci .............................. peripheral component interconnect pxe............................. preboot execution environment ram ............................ random access memory ramdac..................... random access memory digital analog converter rdram ....................... rambus dynamic random access memory rimm........................... rambus inline memory module rtc............................. real time clock sb ............................... soundblaster sdram ....................... synchronous dynamic random access memory sgram ....................... synchronous graphic random access memory smbus......................... system management bus svga .......................... super video graphic adapter usb............................. universal serial bus vga ............................ video graphic adapter wol............................ wake on lan

▲Up To Search▲

Price & Availability of D1106

	To Download D1106 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .